Sand Stone Paving Inc.
Call NowFree Quote
Asphalt Sealcoating by Sand Stone Paving in the Greater Toronto Area
Commercial · Paving

Asphalt Sealcoating & Driveway Sealing

Asphalt sealcoating and driveway sealing across the Greater Toronto Area, with proper cleaning, oil-spot treatment and crack filling so the finish actually lasts.

Get A Free Quote

Tell us about your project and we will get right back to you.

What We Do

Asphalt Sealcoating & Driveway Sealing In The Greater Toronto Area

Asphalt loses its binders to sun, water and vehicle fluids over time, which is what leads to fading, cracking and costly failure. Sealcoating and driveway sealing replace that protective layer, slowing oxidation and stopping water from reaching the base. Preparation is what makes it last: Sand Stone Paving cleans the surface, treats oil spots and routs and fills cracks before sealing, so you get a durable finish across the Greater Toronto Area rather than sealer sitting on a dirty, cracked surface.

Asphalt Sealcoating completed by Sand Stone Paving
Asphalt Sealcoating by Sand Stone Paving
Why Choose Us

Why Choose Sand Stone Paving For Asphalt Sealcoating

We prep properly before we seal. Cleaning, oil-spot treatment and crack filling are what make sealcoating last, and they are exactly the steps cheaper jobs skip. We have 8+ years across the Greater Toronto Area, and we are BBB accredited with an A+ rating and fully insured.

Protects Your Investment

Sealcoating shields asphalt from water, UV and oil, slowing costly deterioration.

Proper Prep

We clean, treat oil spots and fill cracks first, the steps cheaper jobs skip.

Looks Brand New

A rich, uniform black finish instantly refreshes a tired lot or driveway.

Cost-Effective

A small spend every few years saves thousands on early replacement.

Our Process

How We Do It

  1. 1

    Clean and prep

    We clean the surface and treat oil spots so the sealer bonds.

  2. 2

    Fill the cracks

    We rout and fill the cracks before sealing, not seal over them.

  3. 3

    Apply sealer

    We apply sealer evenly at the right rate for a durable, uniform finish.

  4. 4

    Cure and re-line

    We let the surface cure, then refresh line markings if needed.

Pricing

What Affects The Price

Every job is different, so we quote each one on its own merits. These are the main things that shape your price.

Area to be sealed

Amount of crack filling and prep required

Number of coats

Re-striping after sealing, if wanted

Where We Work

Asphalt Sealcoating Across The Greater Toronto Area

Choose your city for local asphalt sealcoating details.

FAQs

Questions About Asphalt Sealcoating

How often should I sealcoat or seal my driveway?

Most commercial lots and driveways benefit from sealing every two to three years, depending on traffic and exposure. We will advise the right interval for your surface.

Does sealing fill cracks?

No. Sealing protects the surface, it does not fill cracks. We rout and fill cracks first, then seal, which is why preparation matters.

How soon can we use the surface after sealing?

Sealer typically needs 24 to 48 hours to cure, depending on weather. We confirm timings before we start.

Is sealing worth it, or should I just replace the asphalt?

If the base is sound, sealing every few years is a small spend that delays a costly replacement. If the asphalt has failed structurally, we will tell you honestly.

What time of year is best for sealcoating?

Warm, dry conditions from late spring through early autumn give the best cure. We plan around the forecast and will advise if waiting gives a better result.

Can you re-stripe the lines after sealing?

Yes. We refresh stall markings, arrows and accessibility symbols once the sealer has cured.

Planning Your Next Project?

Get a free, no-obligation quote for your driveway, patio or commercial lot. Straight advice and a fair price.